
Pool Leak Detection in the Algarve.
Pool losing water? Start with a focused assessment, not another round of topping up.

Pool Leak Detection for your pool
A focused water-loss investigation covering the pool, its fittings, accessible equipment and relevant pipe circuits. The service is built around finding the affected part of the installation and defining a targeted repair, with the evidence and any remaining uncertainty clearly explained.
Water loss that needs more than a refill
A falling waterline does not automatically mean the pool shell has failed. Evaporation, splash-out, backwashing and automatic top-up systems can hide or imitate a leak. We first establish when water disappears and whether the loss changes with the filtration system running. Photos of the waterline, dates of refills and information about recent work help narrow the investigation. A suspected leak needs a clear starting point before any repair is proposed.
Separate the pool from the pipework
We assess accessible equipment, skimmers, return fittings, visible finishes and the behaviour of each relevant circuit. Where appropriate, controlled testing can help distinguish a pipe fault from a fitting or shell problem. The method depends on the pool construction and access; no single test locates every leak. If the evidence points below the terrace, the next step is a targeted investigation rather than opening the whole surrounding area.
A repair scope you can understand
Once the likely source is established, the repair proposal should explain what needs opening, what will be replaced or sealed, and what making good includes. Access, finish matching and the possibility of an additional hidden fault should be discussed before work begins. For pipework, see pool pipe leak repair; for leakage around a fitting, see skimmer and return repairs. A complete refurbishment is a separate decision, not the default answer to every water-loss problem.
Check the result after repair
The work is not complete just because the pool looks tidy. Appropriate checks may include retesting the repaired line and monitoring the water level under agreed conditions. The comparison needs to account for rain, top-up, cleaning and normal pool use. A record of the repair and the observations afterwards makes it easier to identify a separate issue if water loss returns. Do not drain the pool to investigate a suspected leak without a professional assessment.
Pool loses water with the pump on or off
We compare water-loss observations with the circulation schedule to decide which parts of the installation need testing. A larger drop during operation can point towards a pressurised line or equipment discharge, while loss with the system stopped calls for a different investigation. Neither pattern proves the source on its own. We account for automatic filling and recent backwashing before defining the tests. Where a line fails testing, pool pipe leak repair addresses the affected section rather than treating the whole pool surface.
Water settles near a fitting or escapes at the plant room
We inspect the waterline fittings and accessible equipment alongside the pool itself. A level that repeatedly settles near an inlet or skimmer is useful evidence, but connected pipes and other loss routes still need checking. Skimmer and return repairs deal with fitting bodies, seals and connections when those are the identified fault. If water is leaving through filtration equipment or an unintended waste discharge, pool filter repair may be the appropriate next step. The investigation ends with the evidence, proposed repair and any access still needed clearly separated.
Before the repair
Is a bucket test proof of a leak?
A greater drop in the pool than in a nearby comparison bucket can indicate abnormal water loss. It does not identify the source. Rain, automatic filling and splashing can make the comparison unreliable.
Can a leak be found without digging?
Some faults can be narrowed down before opening the surrounding surface. Access or excavation may still be needed to confirm and repair the problem; this depends on the actual fault.
Should I empty the pool?
No. Emptying can create structural risks, especially where groundwater is high. The correct water level and any draining plan need professional assessment.
A pool problem needs
a clear repair plan.
Water loss, damaged finishes or equipment trouble? Start with the symptom and the property location.
Telephone contact details will be added here.